| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
When argument information is not available. So it should not happen for
`yield` (error). In contrast, the error from `super` should be handled
in run time (ignored).
|
|
along with repeated calls of `strlen()`.
|
|
|
|
|
|
|
|
Add new pool value type `IREP_TT_BIGINT` and generate integer overflow
error in the VM. In the future, `mruby` will support `Bignum` for
integers bigger than `mrb_int` (probably using `mpz`).
|
|
We have introduced following new instructions.
* `OP_LAMBDA16`
* `OP_BLOCK16`
* `OP_METHOD16`
* `OP_EXEC16`
Each instruction uses 16 bits operand for `reps` index. Since new
instructions are added, `mruby/c` VM should be updated.
Due to new instructions, dump format compatibility is lost, we have
increased `RITE_BINARY_MAJOR_VER`.
In addition, we have decreased the size of `refcnt` in `mrb_irep` from
`uint32_t` to `uint16_t`, which is reasonably big enough.
|
|
This reverts commit dc51d89ac22acc60b9bfeed87115863565b74085.
|
|
Instead of including `mruby/presym.h` everywhere, we provided the
fallback `mruby/presym.inc` under `include/mruby` directory, and specify
`-I<build-dir>/include` before `-I<top-dir>/include` in `presym.rake`.
So even when someone drops `-I<build-dir>/include` in compiler options,
it just compiles without failure.
|
|
Addressed an issue where existing programs linking `libmruby.a` could only
be built by adding `<build-dir>/include` to compiler's include path.
|
|
|
|
https://github.com/shuujii/mruby into shuujii-improve-source-scanning-for-presym
|
|
- Fix spelling
- Run only on pull request
- Using https://github.com/client9/misspell
|
|
Lint
|
|
The accuracy is greatly improved by using the C preprocessor to scan C
sources for presym. C preprocessor can perfectly interpret all comments and
preprocessor directives, so it can detect all symbols defined, for example
`mrbgems/mruby-socket/src/const.cstub`.
Also, as described later, this change will greatly improve the accuracy of
presym detection from Ruby sources.
## Result
The number of lines in the `presym` file for all gems is as follows:
```console
Previous: 999 (false positive = 89, undetected = 297)
New: 1207
```
## Build process
The new build process (with presym) is as follows:
1. Build `mrbc` without presym (more on building without presym later).
2. Compile Ruby sources to C struct format with the `mrbc` created in
step 1, and create` mrblib.c` and `gem_init.c`. Note that the symbols
in the created files are output as `MRB_SYM` family macros or
`mrb_intern_lit` instead of IDs (details will be described later).
3. C preprocessor processes C sources including the created files of
step 2 and outputs them as `.i` files. In these files, for example,
`MRB_IVSYM(foo)` is converted to `<@! "@" "foo" !@>` and
`mrb_define_module(mrb, "Foo")` is converted to `<@! "Foo" !@>`.
4. Scan the files created in step 3 and create `presym` and` presym.inc`
files.
The files created in step 2 should output all static symbols defined in Ruby
sources, including local variables, so we can detect all presyms by just
scanning C sources without scanning Ruby sources directly.
Further, by this process, the files to be scanned becomes the same as the
files to be compiled, so that there is no excess or deficiency.
## Related changes
The following changes have been made in relation to realizing this feature.
### Allow build without presym
It enables build without presym to achieve the "Build process: 1". This
incorporates #5202, see its issue for details.
Note that when presym is enabled, even adding a local variable to a Ruby
source may change contents of presym and require recompilation of almost
all C sources. This is inconvenient, especially during trial and error in
development, but this feature is also useful because it does not cause
this problem if presym is disabled.
### Automatically create build target for `mrbc` without presym
The `mrbc` used in the "Build process: 1" will be built by automatically
creating a build target for it. The build name is `SOURCE_BUILD_NAME/mrbc`.
### Constantize output of C struct format by `mrbc`
To realizing the "Build process: 2", as mentioned above, symbol IDs are not
output directly in C struct format output by `mrbc`. As a result, the output
becomes constant regardless of the state of presym at the time of `mrbc`
build, and it is possible to detect symbols of Ruby sources in the same way
as other C sources.
Note that `mrb_intern_lit` is used for symbols that do not become presym,
but in this state, the corresponding element in the symbol array cannot be
statically initialized, so it is initialized at run time (therefore, in this
case, the `const` qualifier is not added to the symbol array).
### Specify arbitrary `mrbc` file
To realizing the "Build process: 2", enabled to specify `mrbc` created by
another build target or pre-built` mrbc`. Use `MRuby::Build#mrbcfile =` to
specify it explicitly. You can omit the "Build process: 1" by specifying
pre-built `mrbc`, and you can always use an optimized build to compile Ruby
sources faster. I think changes that affect the output of `mrbc` are rare,
so in many cases it helps to improve efficiency.
With presym, the build will be a little slower due to more build steps, but
this feature will improve it a bit.
### Create presym files for each build target
This feature was proposed at #5194 and merged once, but was reverted in
5c205e6e due to problems especially with cross-compilation. It has been
introduced again because this change solves the problem.
The presym files will be created below.
* `build/NAME/presym`
* `build/NAME/include/mruby/presym.inc`
### Other changes
* Because presym detection accuracy is greatly improved as mentioned above,
`MRuby::Gem::Specification#cdump?` is set to true by default, and
`disable_cdump` is added instead of `enable_cdump`. Also, support for gem
specific presym files has been discontinued (https://github.com/mruby/mruby/issues/5151#issuecomment-730967232).
* Previously, `mrbc` was automatically created for the `host` build, but it
will not be created if the build target for `mrbc` mentioned above is
automatically created. At this time, `mrbc` file of the `mrbc` build is
copied to` bin/`.
* Two types of `.d` files will be created, `.o.d` and `.i.d`. oThis is
because if `.i` depends on `presym.inc`, the dependency will circulate, so
the `.d` file cannot be shared.
* Changed file created with `enable_cxx_exception` to `X-cxx.cxx` from
`X.cxx` to use the mruby standard Rake rule.
### Note
Almost all C sources will need to be recompiled if there are any changes to
`persym.inc` (if not recompiled properly, it will often result in run-time
error). If `gcc` toolchain is used, dependencies are resolved by the `.d`
file, so it become automatically recompile target, but if not (e.g. MSVC),
it is necessary to manually make it recompile target.
Also, even if `gcc` toolchain is used, it may not become recompile target if
external gems does not use the mruby standard Rake rule. In particular, if
the standard rule is overwritten, such as
https://github.com/mruby/mruby/pull/5112/files, `.d` file will not be read,
so be careful.
|
|
|
|
|
|
|
|
|
|
|
|
Follow commit 7150c6753933f12a2ba63769fb7b3a44cfcddd3d .
|
|
Jump target address is `operand (16bit)` + `address of next instruction`.
In addition, `ilen` was made `uint32_t` so that `iseq` length limitation
of 65536 is removed. Only jump target address should be within signed
16bit (-32768 .. 32767).
|
|
| Previous Name | New Name |
|------------------------------|-------------------------|
| MRB_ENABLE_ALL_SYMBOLS | MRB_USE_ALL_SYMBOLS |
| MRB_ENABLE_SYMBOLL_ALL | MRB_USE_ALL_SYMBOLS |
| MRB_ENABLE_CXX_ABI | MRB_USE_CXX_ABI |
| MRB_ENABLE_CXX_EXCEPTION | MRB_USE_CXX_EXCEPTION |
| MRB_ENABLE_DEBUG_HOOK | MRB_USE_DEBUG_HOOK |
| MRB_DISABLE_DIRECT_THREADING | MRB_NO_DIRECT_THREADING |
| MRB_DISABLE_STDIO | MRB_NO_STDIO |
| ENABLE_LINENOISE | MRB_USE_LINENOISE |
| ENABLE_READLINE | MRB_USE_READLINE |
| DISABLE_MIRB_UNDERSCORE | MRB_NO_MIRB_UNDERSCORE |
| DISABLE_GEMS | MRB_NO_GEMS |
* `MRB_ENABLE_SYMBOLL_ALL` seems to be a typo, so it is fixed.
* `MRB_` prefix is added to those without.
* The previous names can also be used for compatibility.
|
|
|
|
To be also able to build mruby without presym in the future. However,
`MRB_QSYM` has been removed and changed as follows:
### Example
| Type | Symbol | Previous Style | New Style |
|---------------------------|--------|------------------|----------------|
| Operator | & | MRB_QSYM(and) | MRB_OPSYM(and) |
| Class Variable | @@foo | MRB_QSYM(00_foo) | MRB_CVSYM(foo) |
| Instance Variable | @foo | MRB_QSYM(0_foo) | MRB_IVSYM(foo) |
| Method with Bang | foo! | MRB_QSYM(foo_b) | MRB_SYM_B(foo) |
| Method with Question mark | foo? | MRB_QSYM(foo_p) | MRB_SYM_Q(foo) |
| Mmethod with Equal | foo= | MRB_QSYM(foo_e) | MRB_SYM_E(foo) |
This change makes it possible to define, for example, `MRB_IVSYM(foo)` as
`mrb_intern_lit(mrb, "@" "foo")`, which is useful if we support building
without presym in the future.
|
|
|
|
|
|
|
|
That loads 32 bit integer bypassing pool access.
|
|
New instructions:
* OP_LOADL16
* OP_LOADSYM16
* OP_STRING16
Size of pools, symbols are `int16_t` but offset representation in the
bytecode was 8 bits. Size of child `irep` array is `int16_t`, too but
this change does not address it.
|
|
Where fixnum overflow can happen.
|
|
- Integrate `Fixnum` and `Integer`
- Remove `Integral`
- `int / int -> int`
- Replace `mrb_fixnum()` to `mrb_int()`
- Replace `mrb_fixnum_value()` to `mrb_int_value()`.
- Use `mrb_integer_p()` instead of `mrb_fixnum_p()`
|
|
We still have `#define MRB_TT_FIXNUM MRB_TT_INTEGER` for compatibility.
|
|
- `MRB_WITHOUT_FLOAT` => `MRB_NO_FLOAT`
- `MRB_USE_FLOAT` => `MRB_USE_FLOAT32`
The former is to use `USE_XXX` naming convention. The latter is to make
sure `float` is 32bit float and not floating point number in general.
|
|
|
|
|
|
When a global jump occurs, look at the catch handler table to determine where to jump.
In that case, `pc` already shows the following instruction, but since the table shows `begin_offset ... end_offset`, the comparison is done with `begin_offset < pc && pc <= end_offset`.
If there is a corresponding handler, move `pc` to `handler.target_offset` and continue running the VM.
When a global jump across `ensure` is made by `return`, `break`, `next`, `redo` and `retry`, the extended `RBreak` object saves and restores the C-level execution position.
This extended `RBreak` can have tag information, which makes it a pseudo coroutine (the "tag" mimics CRuby).
The implementation of pseudo coroutines by `RBreak` is summarized by `CHECKPOINT_RESTORE ... CHECKPOINT_MAIN ... CHECKPOINT_END` and `throw_tagged_break` / `unwind_ensure` macros.
The restart of processing is branched by `RBREAK_TAG_FOREACH(DISPATCH_CHECKPOINTS)`.
- Not only `rescue` blocks but also `ensure` blocks are now sandwiched between `OP_EXCEPT` and `OP_RAISEIF`.
- Remove the function `ecall()`.
It is no longer necessary to re-enter the VM to perform an "ensure block".
This will resolves #1888.
- Added instruction `OP_JUW` (Jump while UnWind).
It jumps unconditionally like `OP_JMP`, but searches the catch handler table and executes the ensure block.
Since it searches the catch handler table, it is much heavier than `OP_JMP`.
|
|
- `OP_EXCEPT` checks if `mrb->exc` is `NULL`, `MRB_TT_EXCEPTION` or
`MRB_TT_BREAK`.
If `mrb->exc` is `NULL`, it will be replaced with `nil`.
- If `OP_RAISE` is `nil`, it does nothing and the immediately
following instruction is executed (like `OP_NOP`).
Also, in case of `RBreak` object, it moves to the processing for
`break`.
With this change, the instruction name is changed from
`OP_RAISE` to `OP_RAISEIF`.
|
|
The catch handler table is combined with iseq block.
This is to prevent the structure from growing by adding a field for the
catch handler table to the `mrb_irep` structure.
"iseq block" and "catch handler table":
[number of catch handler table (2 bytes)]
[number of byte code (4 bytes)]
[iseq (any bytes)]
[catch handlers (multiple of 7 bytes)]
catch handler:
[catch type (1 byte)]
[begin offset (2 bytes)]
[end offset (2 bytes)]
[target offset (2 bytes)]
catch type: enum mrb_catch_type (0 = rescue, 1 = ensure)
begin offset: Includes the specified instruction address
end offset: Does not include the specified instruction address
target offset: replaces pc with the specified instruction address
This table is not expanded by `read_irep_record_1()`.
The necessary elements are expanded one by one when used.
|
|
|
|
|
|
They are included from `mruby.h` anyway, and including it ahead can
cause some errors regarding `INT32_MAX` etc. with C++ compiler.
|
|
|
|
- `MRB_64BIT`: the size of a pointer is 64 bits
- `MRB_INT64`: the size of `mrb_int` is 64 bits
|
|
|
|
Changes:
- `pool format is completely replaced
- supported types: `STR`, `INT32`, `INT64`, `FLOAT`
- `FLOAT` may be replaced by binary representation in the future
- insert `NUL` after string literals in `mrb` files
- `irep->pool` no longer store values in `mrb_value`
- instead it stores in `mrb_pool_value`
- less allocation
- `mrb_irep` can be stored in ROM
|
|
That stands for "local variable information".
|
|
- `pool`
- `syms`
- `reps`
|
