| Age | Commit message (Collapse) | Author |
|---|
|
- stdlib.h
- stddef.h
- stdint.h
- stdarg.h
- limits.h
- float.h
|
|
|
|
- `Module#method_added`
- `BasicObject#singleton_method_added`
|
|
The `MRB_OBJ_ALLOC()` macro function returns a pointer of the type corresponding to the constant literal defined in `enum mrb_vtype`.
|
|
- ` mrb_block_given_p()` -- The name comes from CRuby's `rb_block_given_p ()`
At the same time, it applies to `f_instance_eval()` and `f_class_eval()` of `mruby-eval`.
|
|
|
|
|
|
|
|
Consistent number conversion function names:
* `mrb_value` to immediate (C) value
* `mrb_int()` -> `mrb_as_int()`
* `mrb_to_flo()` -> `mrb_as_float()`
* `mrb_value` to `mrb_value` (converted)
* `mrb_to_int()'
* `mrb_Integer()` - removed
* `mrb_Float()` -> `mrb_to_float`
Consistent function name (avoid `_flo` suffix):
* `mrb_div_flo()` -> `mrb_div_float`
|
|
Fix annotations for inline iseq of `Class.new` [ci skip]
|
|
|
|
Replaces the magic number `7` except in `src/gc.c`.
|
|
The following methods will be made static.
- `Class#new`
- `Proc#call`
- `Kernel#catch`
Previously, static const RProc could not be registered as a method, but this has been changed to allow it.
|
|
In addition, stop eager allocation of `mt` table.
|
|
The `init_SYMBOLS()` function implicitly defined in `MRB_PRESYM_DEFINE_VAR_AND_INITER()` requires some familiarity when trying to find it from the caller.
By introducing `MRB_PRESYM_INIT_SYMBOLS()`, it is possible to find directly from the identifier.
|
|
This reverts commit dc51d89ac22acc60b9bfeed87115863565b74085.
|
|
Instead of including `mruby/presym.h` everywhere, we provided the
fallback `mruby/presym.inc` under `include/mruby` directory, and specify
`-I<build-dir>/include` before `-I<top-dir>/include` in `presym.rake`.
So even when someone drops `-I<build-dir>/include` in compiler options,
it just compiles without failure.
|
|
https://github.com/shuujii/mruby into shuujii-avoid-including-presym.inc-in-existing-header-files
|
|
dearblue-reorganize-ci
|
|
|
|
Addressed an issue where existing programs linking `libmruby.a` could only
be built by adding `<build-dir>/include` to compiler's include path.
|
|
This enhances self-containment.
Previously `mrb_context::stack` had the current call level stack, but now it owns it.
The `mrb_context::stack` field, which is no longer needed, will be removed.
|
|
https://github.com/shuujii/mruby into shuujii-improve-source-scanning-for-presym
|
|
#### Before this patch:
```ruby
__send__ #=> wrong number of arguments
{}.default(1,2) #=> wrong number of arguments
```
#### After this patch:
```ruby
__send__ #=> wrong number of arguments (given 0, expected 1+)
{}.default(1,2) #=> wrong number of arguments (given 2, expected 0..1)
```
|
|
#### Before this patch:
```console
$ bin/mruby -e '{}.key?'
trace (most recent call last):
-e:1: wrong number of arguments (ArgumentError)
```
#### After this patch:
```console
$ bin/mruby -e '{}.key?'
trace (most recent call last):
-e:1: wrong number of arguments (given 0, expected 1) (ArgumentError)
```
|
|
Lint
|
|
The accuracy is greatly improved by using the C preprocessor to scan C
sources for presym. C preprocessor can perfectly interpret all comments and
preprocessor directives, so it can detect all symbols defined, for example
`mrbgems/mruby-socket/src/const.cstub`.
Also, as described later, this change will greatly improve the accuracy of
presym detection from Ruby sources.
## Result
The number of lines in the `presym` file for all gems is as follows:
```console
Previous: 999 (false positive = 89, undetected = 297)
New: 1207
```
## Build process
The new build process (with presym) is as follows:
1. Build `mrbc` without presym (more on building without presym later).
2. Compile Ruby sources to C struct format with the `mrbc` created in
step 1, and create` mrblib.c` and `gem_init.c`. Note that the symbols
in the created files are output as `MRB_SYM` family macros or
`mrb_intern_lit` instead of IDs (details will be described later).
3. C preprocessor processes C sources including the created files of
step 2 and outputs them as `.i` files. In these files, for example,
`MRB_IVSYM(foo)` is converted to `<@! "@" "foo" !@>` and
`mrb_define_module(mrb, "Foo")` is converted to `<@! "Foo" !@>`.
4. Scan the files created in step 3 and create `presym` and` presym.inc`
files.
The files created in step 2 should output all static symbols defined in Ruby
sources, including local variables, so we can detect all presyms by just
scanning C sources without scanning Ruby sources directly.
Further, by this process, the files to be scanned becomes the same as the
files to be compiled, so that there is no excess or deficiency.
## Related changes
The following changes have been made in relation to realizing this feature.
### Allow build without presym
It enables build without presym to achieve the "Build process: 1". This
incorporates #5202, see its issue for details.
Note that when presym is enabled, even adding a local variable to a Ruby
source may change contents of presym and require recompilation of almost
all C sources. This is inconvenient, especially during trial and error in
development, but this feature is also useful because it does not cause
this problem if presym is disabled.
### Automatically create build target for `mrbc` without presym
The `mrbc` used in the "Build process: 1" will be built by automatically
creating a build target for it. The build name is `SOURCE_BUILD_NAME/mrbc`.
### Constantize output of C struct format by `mrbc`
To realizing the "Build process: 2", as mentioned above, symbol IDs are not
output directly in C struct format output by `mrbc`. As a result, the output
becomes constant regardless of the state of presym at the time of `mrbc`
build, and it is possible to detect symbols of Ruby sources in the same way
as other C sources.
Note that `mrb_intern_lit` is used for symbols that do not become presym,
but in this state, the corresponding element in the symbol array cannot be
statically initialized, so it is initialized at run time (therefore, in this
case, the `const` qualifier is not added to the symbol array).
### Specify arbitrary `mrbc` file
To realizing the "Build process: 2", enabled to specify `mrbc` created by
another build target or pre-built` mrbc`. Use `MRuby::Build#mrbcfile =` to
specify it explicitly. You can omit the "Build process: 1" by specifying
pre-built `mrbc`, and you can always use an optimized build to compile Ruby
sources faster. I think changes that affect the output of `mrbc` are rare,
so in many cases it helps to improve efficiency.
With presym, the build will be a little slower due to more build steps, but
this feature will improve it a bit.
### Create presym files for each build target
This feature was proposed at #5194 and merged once, but was reverted in
5c205e6e due to problems especially with cross-compilation. It has been
introduced again because this change solves the problem.
The presym files will be created below.
* `build/NAME/presym`
* `build/NAME/include/mruby/presym.inc`
### Other changes
* Because presym detection accuracy is greatly improved as mentioned above,
`MRuby::Gem::Specification#cdump?` is set to true by default, and
`disable_cdump` is added instead of `enable_cdump`. Also, support for gem
specific presym files has been discontinued (https://github.com/mruby/mruby/issues/5151#issuecomment-730967232).
* Previously, `mrbc` was automatically created for the `host` build, but it
will not be created if the build target for `mrbc` mentioned above is
automatically created. At this time, `mrbc` file of the `mrbc` build is
copied to` bin/`.
* Two types of `.d` files will be created, `.o.d` and `.i.d`. oThis is
because if `.i` depends on `presym.inc`, the dependency will circulate, so
the `.d` file cannot be shared.
* Changed file created with `enable_cxx_exception` to `X-cxx.cxx` from
`X.cxx` to use the mruby standard Rake rule.
### Note
Almost all C sources will need to be recompiled if there are any changes to
`persym.inc` (if not recompiled properly, it will often result in run-time
error). If `gcc` toolchain is used, dependencies are resolved by the `.d`
file, so it become automatically recompile target, but if not (e.g. MSVC),
it is necessary to manually make it recompile target.
Also, even if `gcc` toolchain is used, it may not become recompile target if
external gems does not use the mruby standard Rake rule. In particular, if
the standard rule is overwritten, such as
https://github.com/mruby/mruby/pull/5112/files, `.d` file will not be read,
so be careful.
|
|
Adjust insertion point in `fix_prepend_module()`.
|
|
Module#include and Module#prepend now affect classes and modules
that have already included or prepended the receiver, mirroring the
behavior if the arguments were included in the receiver before
the other modules and classes included or prepended the receiver.
```ruby
class C; end
module M1; end
module M2; end
C.include M1
M1.include M2
p C.ancestors #=> [C, M1, M2, Object, Kernel, BasicObject]
```
|
|
Integrate the implementation with `Module#define_method`.
- Introduce the internal function `mrb_mod_define_method_m()` (no static)
- The `Object#define_singleton_method` method can now accept a second argument
|
|
|
|
This object is treated as an immediate value.
|
|
The `MRB_API` function `mrb_mt_foreach()` previously used the private structure `struct mt_elem`.
Therefore, use `mrb_method_t` instead.
|
|
Prohibit array changes by "a"/"*" specifier of `mrb_get_args()`
|
|
The `mrb_get_argv()` function will now return `const mrb_value *`.
This is because it is difficult for the caller to check if it is a splat argument (array object) and to write-barrier if necessary.
|
|
The "a"/"*" specifier of the `mrb_get_args()` function will now return `const mrb_value *`.
This is because it is difficult for the caller to check if it is an array object and write-barrier if necessary.
And it requires calling `mrb_ary_modify()` on the unmodified array object, which is also difficult (this is similar to #5087).
|
|
- `mrb_check_intern()` to return `mrb_value`
- `mrb_intern_check()` to return `mrb_sym` [NEW]
Other new functions:
- `mrb_intern_check_cstr()`
- `mrb_intern_check_str()`
|
|
* `mrb_kwargs` structure reordered (`values` and `rest` come last)
* take symbols instead of C `char*`
|
|
Caused from combination of `mrb_int`, `int` and `size_t`..
|
|
They are basically the copy of instance variable tables. On my Linux
box, memory consumption of `mrbtest` measured by `valgrind` is:
- old: 17,683,830 bytes
- new: 14,283,749 bytes
|
|
- Integrate `Fixnum` and `Integer`
- Remove `Integral`
- `int / int -> int`
- Replace `mrb_fixnum()` to `mrb_int()`
- Replace `mrb_fixnum_value()` to `mrb_int_value()`.
- Use `mrb_integer_p()` instead of `mrb_fixnum_p()`
|
|
They used to return `mrb_value` but now return `mrb_sym` for consistency
with other `intern` functions. If symbols are not defined, `check`
functions return `0`, instead of `nil` in the past.
It causes API incompatibility but I believe few people use those
functions out of the core, and those changes are very easy to handle,
hopefully.
|
|
We still have `#define MRB_TT_FIXNUM MRB_TT_INTEGER` for compatibility.
|
|
* The `Fixnum` constant is now an alias for the `Integer` class.
* Remove `struct mrb_state::fixnum_class` member.
If necessary, use `struct mrb_state::integer_class` instead.
|
|
- `MRB_WITHOUT_FLOAT` => `MRB_NO_FLOAT`
- `MRB_USE_FLOAT` => `MRB_USE_FLOAT32`
The former is to use `USE_XXX` naming convention. The latter is to make
sure `float` is 32bit float and not floating point number in general.
|
|
If this assertion fails, you have to define `MRB_USE_METHOD_T_STRUCT`.
|
|
|
|
Clearing all method cache using `memset` is faster than conditional
clear by method id.
|
|
|
|
Introduced `MRB_NO_METHOD_CACHE` which is inverse of `MRB_METHOD_CACHE`
that should be enabled intestinally. In addition, the default cache is
made bigger (128 -> 256).
|
