| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Where fixnum overflow can happen.
|
|
- Integrate `Fixnum` and `Integer`
- Remove `Integral`
- `int / int -> int`
- Replace `mrb_fixnum()` to `mrb_int()`
- Replace `mrb_fixnum_value()` to `mrb_int_value()`.
- Use `mrb_integer_p()` instead of `mrb_fixnum_p()`
|
|
They used to return `mrb_value` but now return `mrb_sym` for consistency
with other `intern` functions. If symbols are not defined, `check`
functions return `0`, instead of `nil` in the past.
It causes API incompatibility but I believe few people use those
functions out of the core, and those changes are very easy to handle,
hopefully.
|
|
As described in ISO 15.2.30.
|
|
We still have `#define MRB_TT_FIXNUM MRB_TT_INTEGER` for compatibility.
|
|
Trailing `.0` is removed from `Float#to_s` and `Float#inspect` at
9d08025b. However, I think the more human-readable format is better
for `Float#inspect`.
For example, in the `Float#to_s` format, the failure message is not
well understood when testing values including types by `eql?` (e.g.
`Numeric#step` test).
```ruby
assert "example" do
exp = 1.0
act = 1
assert_operator(exp, :eql?, act) #=> Expected 1 to be eql? 1.
end
```
|
|
* The `Fixnum` constant is now an alias for the `Integer` class.
* Remove `struct mrb_state::fixnum_class` member.
If necessary, use `struct mrb_state::integer_class` instead.
|
|
```console
$ bin/mruby -e 'p({1 => 2}.key?(1.0))'
true
```
```console
$ bin/mruby -e 'p({1 => 2}.key?(1.0))'
false
```
|
|
close #3123
|
|
|
|
|
|
- `MRB_WITHOUT_FLOAT` => `MRB_NO_FLOAT`
- `MRB_USE_FLOAT` => `MRB_USE_FLOAT32`
The former is to use `USE_XXX` naming convention. The latter is to make
sure `float` is 32bit float and not floating point number in general.
|
|
If this assertion fails, you have to define `MRB_USE_METHOD_T_STRUCT`.
|
|
On some platforms, `sizeof(mrb_value) > sizeof(void*)*3`, which makes
`MRB_ARY_EMBED_LEN_MAX` zero. And zero sized array cause compile errors.
|
|
|
|
|
|
|
|
Variables in jump destination block separate declaration and assignment.
|
|
Changes made after `setjmp()` are destroyed and need reassignment.
This problem is now caused by the addition of the `OP_JUW` instruction.
When actually building on FreeBSD 12.1 with `clang10 -fsanitize=address`, mrbtest "NameError#name [15.2.31.2.1]" is failed.
However, qualifying `pc` with `volatile` slows down significantly and increases the object code.
Suppress them by qualifying only the variables that restore `pc`.
|
|
When a global jump occurs, look at the catch handler table to determine where to jump.
In that case, `pc` already shows the following instruction, but since the table shows `begin_offset ... end_offset`, the comparison is done with `begin_offset < pc && pc <= end_offset`.
If there is a corresponding handler, move `pc` to `handler.target_offset` and continue running the VM.
When a global jump across `ensure` is made by `return`, `break`, `next`, `redo` and `retry`, the extended `RBreak` object saves and restores the C-level execution position.
This extended `RBreak` can have tag information, which makes it a pseudo coroutine (the "tag" mimics CRuby).
The implementation of pseudo coroutines by `RBreak` is summarized by `CHECKPOINT_RESTORE ... CHECKPOINT_MAIN ... CHECKPOINT_END` and `throw_tagged_break` / `unwind_ensure` macros.
The restart of processing is branched by `RBREAK_TAG_FOREACH(DISPATCH_CHECKPOINTS)`.
- Not only `rescue` blocks but also `ensure` blocks are now sandwiched between `OP_EXCEPT` and `OP_RAISEIF`.
- Remove the function `ecall()`.
It is no longer necessary to re-enter the VM to perform an "ensure block".
This will resolves #1888.
- Added instruction `OP_JUW` (Jump while UnWind).
It jumps unconditionally like `OP_JMP`, but searches the catch handler table and executes the ensure block.
Since it searches the catch handler table, it is much heavier than `OP_JMP`.
|
|
`OP_PUSHERR`, `OP_POPERR`, `OP_EPUSH` and `OP_EPOP` are removed.
|
|
- `OP_EXCEPT` checks if `mrb->exc` is `NULL`, `MRB_TT_EXCEPTION` or
`MRB_TT_BREAK`.
If `mrb->exc` is `NULL`, it will be replaced with `nil`.
- If `OP_RAISE` is `nil`, it does nothing and the immediately
following instruction is executed (like `OP_NOP`).
Also, in case of `RBreak` object, it moves to the processing for
`break`.
With this change, the instruction name is changed from
`OP_RAISE` to `OP_RAISEIF`.
|
|
The catch handler table is combined with iseq block.
This is to prevent the structure from growing by adding a field for the
catch handler table to the `mrb_irep` structure.
"iseq block" and "catch handler table":
[number of catch handler table (2 bytes)]
[number of byte code (4 bytes)]
[iseq (any bytes)]
[catch handlers (multiple of 7 bytes)]
catch handler:
[catch type (1 byte)]
[begin offset (2 bytes)]
[end offset (2 bytes)]
[target offset (2 bytes)]
catch type: enum mrb_catch_type (0 = rescue, 1 = ensure)
begin offset: Includes the specified instruction address
end offset: Does not include the specified instruction address
target offset: replaces pc with the specified instruction address
This table is not expanded by `read_irep_record_1()`.
The necessary elements are expanded one by one when used.
|
|
|
|
Since some compiler complains when we `typedef` `mrb_value`.
|
|
|
|
Clearing all method cache using `memset` is faster than conditional
clear by method id.
|
|
|
|
|
|
|
|
|
|
Since it's an internal static function.
|
|
When the array is very big, the simpler `mrb_write_barrier` causes
calling `gc_mark_children` for big arrays repeatedly. That would hinder
performance very badly.
|
|
|
|
Which is caused by `MRB_NAN_BOXING`.
|
|
|
|
Introduced `MRB_NO_METHOD_CACHE` which is inverse of `MRB_METHOD_CACHE`
that should be enabled intestinally. In addition, the default cache is
made bigger (128 -> 256).
|
|
|
|
|
|
The minor versions should be upper compatible. So mere opcode, section
addition can be done without breaking compiled binary.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- `MRB_64BIT`: the size of a pointer is 64 bits
- `MRB_INT64`: the size of `mrb_int` is 64 bits
|
