Adding barpadding patch and moving patches.h to paches.def.h

1 files changed, 0 insertions, 643 deletions

diff --git a/patches.h b/patches.h
deleted file mode 100644
index 3ddaf51..0000000
--- a/patches.h
+++ /dev/null
@@ -1,643 +0,0 @@
-/*
- * This file contains patch control flags.
- *
- * In principle you should be able to mix and match any patches
- * you may want. In cases where patches are logically incompatible
- * one patch may take precedence over the other as noted in the
- * relevant descriptions.
- *
- * Although layouts typically come as patches they are differentiated
- * here for grouping purposes.
- */
-
-/* Patches */
-
-/* This patch changes the rectangle indicating if a tag is used by a client into a bar
- * above the tag name for better visibility.
- * https://dwm.suckless.org/patches/activetagindicatorbar/
- */
-#define ACTIVETAGINDICATORBAR_PATCH 0
-
-/* The alpha patch adds transparency for the status bar.
- * https://dwm.suckless.org/patches/alpha/
- */
-#define ALPHA_PATCH 0
-
-/* This patch introduces alternative tags which can be switched on the fly for the
- * sole purpose of providing visual aid.
- * https://dwm.suckless.org/patches/alternativetags/
- */
-#define ALTERNATIVE_TAGS_PATCH 0
-
-/* This patch prevents the focus to drift from the active fullscreen client when
- * using focusstack().
- * https://dwm.suckless.org/patches/alwaysfullscreen/
- */
-#define ALWAYSFULLSCREEN_PATCH 0
-
-/* This patch adds new clients above the selected client, instead of always
- * becoming the new master. This behaviour is known from Xmonad.
- * This patch takes precedence over ATTACHASIDE_PATCH.
- * https://dwm.suckless.org/patches/attachabove/
- */
-#define ATTACHABOVE_PATCH 0
-
-/* This patch adds new clients on top of the stack.
- * This patch takes precedence over ATTACHBELOW_PATCH.
- * https://dwm.suckless.org/patches/attachaside/
- */
-#define ATTACHASIDE_PATCH 0
-
-/* This patch adds new clients below the selected client.
- * This patch takes precedence over ATTACHBOTTOM_PATCH.
- * https://dwm.suckless.org/patches/attachbelow/
- */
-#define ATTACHBELOW_PATCH 0
-
-/* This patch adds new clients at the bottom of the stack.
- * https://dwm.suckless.org/patches/attachbottom/
- */
-#define ATTACHBOTTOM_PATCH 0
-
-/* This patch will make dwm run "~/.config/dwm/autostart_blocking.sh" and
- * "~/.config/dwm/autostart.sh &" before entering the handler loop. One or
- * both of these files can be ommited. Note the path inside .config rather
- * than the original ~/.dwm folder.
- * https://dwm.suckless.org/patches/autostart/
- */
-#define AUTOSTART_PATCH 0
-
-/* By default, windows that are not visible when requesting a resize/move will not
- * get resized/moved. With this patch, they will.
- * https://dwm.suckless.org/patches/autoresize/
- */
-#define AUTORESIZE_PATCH 0
-
-/* Enhanced taskbar that shows the titles of all visible windows in the status bar
- * and allows focus / hiding / unhiding of windows by clicking on the status bar.
- * Awesomebar takes precedence over fancybar.
- * https://dwm.suckless.org/patches/awesomebar/
- */
-#define AWESOMEBAR_PATCH 0
-
-/* This patch adds an iscentered rule to automatically center clients on the current monitor.
- * This patch takes precedence over centeredwindowname and fancybar patches.
- * https://dwm.suckless.org/patches/center/
- */
-#define CENTER_PATCH 0
-
-/* This patch centers the WM_NAME of the currently selected window on the status bar.
- * Both fancybar and awesomebar patches take precedence over this patch.
- * https://dwm.suckless.org/patches/centeredwindowname/
- */
-#define CENTEREDWINDOWNAME_PATCH 0
-
-/* This patch provides the ability to assign different weights to clients in their
- * respective stack in tiled layout.
- * https://dwm.suckless.org/patches/cfacts/
- */
-#define CFACTS_PATCH 0
-
-/* This patch allows color attributes to be set through the command line.
- * https://dwm.suckless.org/patches/cmdcustomize/
- */
-#define CMDCUSTOMIZE_PATCH 0
-
-/* This patch tweaks the tagging interface so that you can select multiple tags for tag
- * or view by pressing all the right keys as a combo. For example to view tags 1 and 3,
- * hold MOD and then press and hold 1 and 3 together.
- * https://dwm.suckless.org/patches/combo/
- */
-#define COMBO_PATCH 0
-
-/* The cyclelayouts patch lets you cycle through all your layouts.
- * https://dwm.suckless.org/patches/cyclelayouts/
- */
-#define CYCLELAYOUTS_PATCH 0
-
-/* Updates the position of dmenu to match that of the bar. I.e. if topbar is 0 then dmenu
- * will appear at the bottom and if 1 then dmenu will appear at the top.
- * https://dwm.suckless.org/patches/dmenumatchtop
- */
-#define DMENUMATCHTOP_PATCH 0
-
-/* This patch lets you resize the split in the tile layout (i.e. modify mfact) by holding
- * the modkey and dragging the mouse.
- * This patch can be a bit wonky with other layouts, but generally works.
- * https://dwm.suckless.org/patches/dragmfact/
- */
-#define DRAGMFACT_PATCH 0
-
-/* Simple dwmc client using a fork of fsignal to communicate with dwm.
- * To use this either copy the patch/dwmc shell script to somewhere in your path or
- * uncomment the following line in Makefile: #cp -f patch/dwmc ${DESTDIR}${PREFIX}/bin
- * http://dwm.suckless.org/patches/dwmc/
- */
-#define DWMC_PATCH 0
-
-/* This patch allows no tag at all to be selected. The result is that dwm will start with
- * no tag selected and when you start a client with no tag rule and no tag selected then
- * it will be opened on the first tag.
- * https://dwm.suckless.org/patches/emptyview/
- */
-#define EMPTYVIEW_PATCH 0
-
-/* Adds EWMH support for _NET_NUMBER_OF_DESKTOPS, _NET_CURRENT_DESKTOP, _NET_DESKTOP_NAMES
- * and _NET_DESKTOP_VIEWPORT, which allows for compatibility with other bars and programs
- * that request workspace information. For example polybar's xworkspaces module.
- * https://dwm.suckless.org/patches/ewmhtags/
- */
-#define EWMHTAGS_PATCH 0
-
-/* This patch allows the user to change size and placement of floating windows using only the
- * keyboard. It also allows for temporary vertical and horizontal extension of windows similar
- * to other WMs fill command.
- * https://dwm.suckless.org/patches/exresize/
- */
-#define EXRESIZE_PATCH 0
-
-/* This patch will enable an extra status bar in dwm in a similar manner to the dualstatus
- * patch. If the primary status is at the top via topbar then the extra status bar will be
- * placed at the bottom and vice versa.
- * https://dwm.suckless.org/patches/extrabar/
- */
-#define EXTRABAR_PATCH 0
-
-/* Only allow clients to "fullscreen" into the space currently given to them.
- * As an example, this will allow you to view a fullscreen video in your browser on
- * one half of the screen, while having the other half available for other tasks.
- * https://dwm.suckless.org/patches/fakefullscreen/
- */
-#define FAKEFULLSCREEN_PATCH 0
-
-/* Similarly to the fakefullscreen patch this patch only allows clients to "fullscreen" into
- * the space currently given to them.
- * The "twist" with this patch is that fake fullscreen can be toggled on a per client basis
- * rather than applying to all clients globally.
- */
-#define FAKEFULLSCREEN_CLIENT_PATCH 0
-
-/* This patch shows the titles of all visible windows in the status bar
- * (as opposed to showing only the selected one).
- * Awesomebar takes precedence over fancybar. Fancybar takes precedence over
- * the centeredwindowname patch.
- * https://dwm.suckless.org/patches/fancybar/
- */
-#define FANCYBAR_PATCH 0
-
-/* This patch provides the ability to focus the tag on the immediate left or right of the
- * currently focused tag. It also allows to send the focused window either on the left or
- * the right tag.
- * http://dwm.suckless.org/patches/focusadjacenttag/
- */
-#define FOCUSADJACENTTAG_PATCH 0
-
-/* Switch focus only by mouse click and not sloppy (focus follows mouse pointer).
- * https://dwm.suckless.org/patches/focusonclick/
- */
-#define FOCUSONCLICK_PATCH 0
-
-/* Selects the next window having the urgent flag regardless of the tag it is on.
- * The urgent flag can be artificially set with the following xdotool command on any window:
- *   xdotool selectwindow -- set_window --urgency 1
- * https://dwm.suckless.org/patches/focusurgent/
- */
-#define FOCUSURGENT_PATCH 0
-
-/* This patch allows a different border color to be chosen for floating windows.
- * https://dwm.suckless.org/patches/float_border_color/
- */
-#define FLOAT_BORDER_COLOR_PATCH 0
-
-/* By default, dwm responds to _NET_ACTIVE_WINDOW client messages by setting
- * the urgency bit on the named window. This patch activates the window instead.
- * https://dwm.suckless.org/patches/focusonnetactive/
- */
-#define FOCUSONNETACTIVE_PATCH 0
-
-/* Applies the monocle layout with the focused client on top and hides the bar. When pressed
- * again it shows the bar and restores the layout that was active before going fullscreen.
- * NB: This patch assumes that the third layout is monocle and that the bar is shown.
- * https://dwm.suckless.org/patches/fullscreen/
- */
-#define FULLSCREEN_PATCH 0
-
-/* This patch prevents dwm from drawing tags with no clients (i.e. vacant) on the bar.
- * https://dwm.suckless.org/patches/hide_vacant_tags/
- */
-#define HIDEVACANTTAGS_PATCH 0
-
-/* With this patch dwm's built-in status bar is only shown when HOLDKEY is pressed
- * and the bar will now overlay the display.
- * http://dwm.suckless.org/patches/holdbar/
- */
-#define HOLDBAR_PATCH 0
-
-/* This patch provides a keybinding to rotate all clients in the currently selected
- * area (master or stack) without affecting the other area.
- * https://dwm.suckless.org/patches/inplacerotate/
- */
-#define INPLACEROTATE_PATCH 0
-
-/* Adds rule option for clients to avoid accidental termination by killclient for sticky windows.
- * https://dwm.suckless.org/patches/ispermanent/
- */
-#define ISPERMANENT_PATCH 0
-
-/* Sometimes dwm crashes when it cannot render some glyphs in window titles (usually emoji).
- * This patch is essentially a hack to ignore any errors when drawing text on the status bar.
- * https://groups.google.com/forum/m/#!topic/wmii/7bncCahYIww
- * https://docs.google.com/viewer?a=v&pid=forums&srcid=MDAwODA2MTg0MDQyMjE0OTgzMzMBMDQ3ODQzODkyMTU3NTAyMTMxNTYBX2RUMVNtOUtDQUFKATAuMQEBdjI&authuser=0
- */
-#define IGNORE_XFT_ERRORS_WHEN_DRAWING_TEXT_PATCH 0
-
-/* This patch adds a keybinding to kills all visible clients that are not selected.
- * https://dwm.suckless.org/patches/killunsel/
- */
-#define KILLUNSEL_PATCH 0
-
-/* Moves the layout symbol in the status bar to the left hand side.
- * http://dwm.suckless.org/patches/leftlayout/
- */
-#define LEFTLAYOUT_PATCH 0
-
-/* By default in dwm it is possible to make an application fullscreen, then use
- * the focusstack keybindings to focus on other windows beneath the current window.
- * It is also possible to spawn new windows (e.g. a terminal) that end up getting
- * focus while the previous window remains in fullscreen. This patch ensures that
- * in such scenarios the previous window loses fullscreen.
- * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-losefullscreen-6.2.diff
- */
-#define LOSEFULLSCREEN_PATCH 0
-
-/* This patch adds helper functions for maximizing, horizontally and vertically, floating
- * windows using keybindings.
- * https://dwm.suckless.org/patches/maximize/
- */
-#define MAXIMIZE_PATCH 0
-
-/* Control Music Player Daemon via keybinds.
- * This patch depends on an additional library lmdpclient so if you want to enable this
- * then you will also have to append -lmpdclient to the LIBS configuration in config.mk.
- * A placeholder has been added there for reference.
- * https://dwm.suckless.org/patches/mpdcontrol/
- */
-#define MDPCONTROL_PATCH 0
-
-/* Adds rules per monitor, e.g. have default layouts per monitor.
- * The use case for this is if the second monitor is vertical (i.e. rotated) then
- * you may want to use a different default layout for this monitor than what is
- * used for the main monitor. E.g. normal vertical split for main monitor and
- * horizontal split for the second.
- */
-#define MONITOR_RULES_PATCH 0
-
-/* Always display the the monocle-symbol as defined in config.h if the monocle-layout
- * is activated. Do not display the number of open clients in the current tag.
- * https://dwm.suckless.org/patches/monoclesymbol/
- */
-#define MONOCLESYMBOL_PATCH 0
-
-/* This patch allows you to move clients around in the stack and swap them with the master.
- * https://dwm.suckless.org/patches/movestack/
- */
-#define MOVESTACK_PATCH 0
-
-/* Removes the border when there is only one window visible.
- * https://dwm.suckless.org/patches/noborder/
- */
-#define NOBORDER_PATCH 0
-
-/* Enable modifying or removing dmenu in config.def.h which resulted previously in a
- * compilation error because two lines of code hardcode dmenu into dwm.
- * https://dwm.suckless.org/patches/nodmenu/
- */
-#define NODMENU_PATCH 0
-
-/* This patch makes it so dwm will only exit via quit() if no windows are open.
- * This is to prevent you accidentally losing all your work.
- * https://dwm.suckless.org/patches/onlyquitonempty/
- */
-#define ONLYQUITONEMPTY_PATCH 0
-
-/* The pertag patch adds nmaster, mfacts and layouts per tag rather than per
- * monitor (default).
- * https://dwm.suckless.org/patches/pertag/
- */
-#define PERTAG_PATCH 0
-
-/* This controls whether or not to also store bar position on a per
- * tag basis, or leave it as one bar per monitor.
- */
-#define PERTAGBAR_PATCH 0
-
-/* This patch provides a way to move clients up and down inside the client list.
- * https://dwm.suckless.org/patches/push/
- */
-#define PUSH_PATCH 0
-
-/* This patch provides a way to move clients up and down inside the client list,
- * but does not push up or down into the master area (except that it does not take
- * nmaster into account).
- * This takes precedence over the push patch above.
- * https://dwm.suckless.org/patches/push/
- */
-#define PUSH_NO_MASTER_PATCH 0
-
-/* By default, windows only resize from the bottom right corner. With this
- * patch the mouse is warped to the nearest corner and you resize from there.
- * https://dwm.suckless.org/patches/resizecorners/
- */
-#define RESIZECORNERS_PATCH 0
-
-/* Adds a keyboard shortcut to restart dwm or alternatively by using kill -HUP dwmpid.
- * Additionally dwm can quit cleanly by using kill -TERM dwmpid.
- * https://dwm.suckless.org/patches/restartsig/
- */
-#define RESTARTSIG_PATCH 0
-
-/* This patch let's you rotate through the stack using keyboard shortcuts.
- * https://dwm.suckless.org/patches/rotatestack/
- */
-#define ROTATESTACK_PATCH 0
-
-/* This patch saves size and position of every floating window before it is forced
- * into tiled mode. If the window is made floating again then the old dimensions
- * will be restored.
- * https://dwm.suckless.org/patches/save_floats/
- */
-#define SAVEFLOATS_PATCH 0
-
-/* The scratchpad patch allows you to spawn or restore a floating terminal window.
- * It is typically useful when one need to do some short typing.
- * https://dwm.suckless.org/patches/scratchpad/
- */
-#define SCRATCHPAD_PATCH 0
-
-/* Allows restarting dwm without the dependency of an external script.
- * https://dwm.suckless.org/patches/selfrestart/
- */
-#define SELFRESTART_PATCH 0
-
-/* This patch allows border pixels to be changed during runtime.
- * https://dwm.suckless.org/patches/setborderpx/
- */
-#define SETBORDERPX_PATCH 0
-
-/* In a multi-head setup monitor 0 is by default the primary screen, with the left and right
- * screen being monitor 1 and 2 respectively. This patch sorts screens left to right (or
- * top to bottom in a vertical layout) which aims to address some inconsistencies when it
- * comes to focusmon, tagmon and similar functionality.
- * https://www.mail-archive.com/[email protected]/msg09400.html
- */
-#define SORTSCREENS_PATCH 0
-
-/* Spawns programs from currently focused client's working directory.
- * https://dwm.suckless.org/patches/spawn_cwd/
- */
-#define SPAWNCMD_PATCH 0
-
-/* This patch draws and updates the statusbar on all monitors.
- * https://dwm.suckless.org/patches/statusallmons/
- */
-#define STATUSALLMONS_PATCH 0
-
-/* This patch enables colored text in the status bar. It changes the way colors are defined
- * in config.h allowing multiple color combinations for use in the status script.
- * https://dwm.suckless.org/patches/statuscolors/
- */
-#define STATUSCOLORS_PATCH 0
-
-/* This patch adds configuration options for horizontal and vertical padding in the status bar.
- * https://dwm.suckless.org/patches/statuspadding/
- */
-#define STATUSPADDING_PATCH 0
-
-/* Adds toggleable keyboard shortcut to make a client 'sticky', i.e. visible on all tags.
- * https://dwm.suckless.org/patches/sticky/
- */
-#define STICKY_PATCH 0
-
-/* The systray patch adds systray for the status bar.
- * https://dwm.suckless.org/patches/systray/
- */
-#define SYSTRAY_PATCH 0
-
-/* This patch adds "window swallowing" to dwm as known from Plan 9's windowing system rio.
- * Clients marked with isterminal in config.h swallow a window opened by any child process,
- * e.g. running xclock in a terminal. Closing the xclock window restores the terminal window
- * in the current position.
- * https://dwm.suckless.org/patches/swallow/
- */
-#define SWALLOW_PATCH 0
-
-/* Switch focus between the master and stack columns using a single keybinding.
- * https://dwm.suckless.org/patches/switchcol/
- */
-#define SWITCHCOL_PATCH 0
-
-/* By default dwm allow you to set application specific rules so that you can have your browser,
- * for example, start up on tag 9 optionally on a given monitor when you open your browser it is
- * then automatically moved to the configured tag, but you have to manually enable the tag to see
- * the newly opened application.
- * This patch adds an extra configuration option for individual rules where:
- *   0 is default behaviour
- *   1 automatically moves you to the tag of the newly opened application and
- *   2 enables the tag of the newly opened application in addition to your existing enabled tags
- *
- * Closing that window reverts the view back to what it was before the window was opened.
- *
- * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-switchtag-6.2.diff
- * Also see https://dwm.suckless.org/patches/switchtotag
- */
-#define SWITCHTAG_PATCH 0
-
-/* Adds keyboard shortcuts to move all (or only floating) windows from one tag to another.
- * https://dwm.suckless.org/patches/tagall/
- */
-#define TAGALL_PATCH 0
-
-/* This patch allows you to move all visible windows on a monitor to an adjacent monitor.
- * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-tagallmon-6.2.diff
- */
-#define TAGALLMON_PATCH 0
-
-/* This patch adds an option to place tags in rows like in many other window managers.
- * https://dwm.suckless.org/patches/taggrid/
- */
-#define TAGGRID_PATCH 0
-
-/* This patch makes new clients attach into the stack area when you toggle a new tag into
- * view. This means your master area will remain unchanged when toggling views.
- * The allmaster patch will cause all clients in the master area to be left alone. This patch
- * takes precedence over the onemaster tagintostack patch.
- * https://dwm.suckless.org/patches/tagintostack/
- */
-#define TAGINTOSTACK_ALLMASTER_PATCH 0
-
-/* This patch makes new clients attach into the stack area when you toggle a new tag into
- * view. This means your master area will remain unchanged when toggling views.
- * The onemaster patch will cause the first client in the master area to be left alone.
- * https://dwm.suckless.org/patches/tagintostack/
- */
-#define TAGINTOSTACK_ONEMASTER_PATCH 0
-
-/* If you try to send a fullscreen window to an adjacent monitor using tagmon then
- * the window is moved behind the scenes, but it remains in fullscreen on the original
- * monitor until you exit fullscreen view (at which point it will appear on the adjacent
- * monitor). This patch allows a fullscreen window to be moved to an adjacent monitor
- * while remaining in fullscreen.
- * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-tagmonfixfs-6.2.diff
- */
-#define TAGMONFIXFS_PATCH 0
-
-/* This patch allows you to swap all visible windows on one monitor with those of an
- * adjacent monitor.
- * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-tagswapmon-6.2.diff
- */
-#define TAGSWAPMON_PATCH 0
-
-/* Adds a new color scheme used by the (selected) window title in the bar.
- * https://dwm.suckless.org/patches/titlecolor/
- */
-#define TITLECOLOR_PATCH 0
-
-/* This patch allows you to toggle fullscreen on and off using a single shortcut key.
- * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-togglefullscreen-6.2.diff
- */
-#define TOGGLEFULLSCREEN_PATCH 0
-
-/* This patch resets isfloating on any visible windows that have it set.
- * Optionally also applies a layout.
- * https://dwm.suckless.org/patches/unfloatvisible/
- */
-#define UNFLOATVISIBLE_PATCH 0
-
-/* This patch makes "urgent" windows have different colors.
- * https://dwm.suckless.org/patches/urgentborder/
- */
-#define URGENTBORDER_PATCH 0
-
-/* This patch adds configurable gaps between windows differentiating between outer, inner,
- * horizontal and vertical gaps.
- * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-vanitygaps-6.2.diff
- * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-vanitygaps-cfacts-6.2.diff
- */
-#define VANITYGAPS_PATCH 0
-
-/* Follow a window to the tag it is being moved to.
- * https://dwm.suckless.org/patches/viewontag/
- */
-#define VIEWONTAG_PATCH 0
-
-/* This patch warps the mouse cursor to the center of the currently focused window or screen
- * when the mouse cursor is (a) on a different screen or (b) on top of a different window.
- * https://dwm.suckless.org/patches/warp/
- */
-#define WARP_PATCH 0
-
-/* Sometimes a single application opens different windows depending on the task
- * at hand and this is often reflected in the WM_WINDOW_ROLE(STRING) x property.
- * This patch adds the role field to the rule configuration so that one can
- * differentiate between, say, Firefox "browser" vs "Preferences" vs "Manager"
- * or Google-chrome "browser" vs "pop-up".
- * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-windowrolerule-6.2.diff
- */
-#define WINDOWROLERULE_PATCH 0
-
-/* The winview patch allows switching the view to that of a given client from the all-window
- * view (Mod-0) using a keyboard shortcut.
- * http://dwm.suckless.org/patches/winview/
- */
-#define WINVIEW_PATCH 0
-
-/* Allows dwm to read colors from xrdb (.Xresources) during runtime. Compatible with
- * the float border color, awesomebar, urgentborder and titlecolor patches.
- * https://dwm.suckless.org/patches/xrdb/
- */
-#define XRDB_PATCH 0
-
-/* The zoomswap patch allows a master and a stack window to swap places
- * rather than every window on the screen changing position.
- * https://dwm.suckless.org/patches/zoomswap/
- */
-#define ZOOMSWAP_PATCH 0
-
-/* Layouts */
-
-/* Bottomstack layout.
- * https://dwm.suckless.org/patches/bottomstack/
- */
-#define BSTACK_LAYOUT 0
-
-/* Bottomstack horizontal layout.
- * https://dwm.suckless.org/patches/bottomstack/
- */
-#define BSTACKHORIZ_LAYOUT 0
-
-/* Centered master layout.
- * https://dwm.suckless.org/patches/centeredmaster/
- */
-#define CENTEREDMASTER_LAYOUT 0
-
-/* Centered floating master layout.
- * https://dwm.suckless.org/patches/centeredmaster/
- */
-#define CENTEREDFLOATINGMASTER_LAYOUT 0
-
-/* Same as the default tile layout except clients in the master area are arranged in
- * columns (i.e. left to right).
- * https://dwm.suckless.org/patches/columns/
- */
-#define COLUMNS_LAYOUT 0
-
-/* Deck layout.
- * https://dwm.suckless.org/patches/deck/
- */
-#define DECK_LAYOUT 0
-
-/* Fibonacci dwindle layout.
- * https://dwm.suckless.org/patches/fibonacci/
- */
-#define FIBONACCI_DWINDLE_LAYOUT 0
-
-/* Fibonacci spiral layout.
- * https://dwm.suckless.org/patches/fibonacci/
- */
-#define FIBONACCI_SPIRAL_LAYOUT 0
-
-/* Flextile deluxe layout.
- * A revamped, more flexible, and over-the-top version of the original flextile layout.
- * https://dwm.suckless.org/patches/flextile/ (original)
- */
-#define FLEXTILE_DELUXE_LAYOUT 0
-
-/* Gappless grid layout.
- * https://dwm.suckless.org/patches/gaplessgrid/
- */
-#define GAPPLESSGRID_LAYOUT 0
-
-/* Gridmode (grid) layout.
- * https://dwm.suckless.org/patches/gridmode/
- */
-#define GRIDMODE_LAYOUT 0
-
-/* Horizontal grid (horizgrid) layout.
- * https://dwm.suckless.org/patches/horizgrid/
- */
-#define HORIZGRID_LAYOUT 0
-
-/* Grid layout where nmaster controls the number of rows.
- * https://dwm.suckless.org/patches/nrowgrid/
- */
-#define NROWGRID_LAYOUT 0
-
-/* The default tile layout.
- * This can be optionally disabled in favour of other layouts.
- */
-#define TILE_LAYOUT 1
-
-/* Monocle layout (default).
- * This can be optionally disabled in favour of other layouts.
- */
-#define MONOCLE_LAYOUT 1