diff options
Diffstat (limited to 'patches.def.h')
| -rw-r--r-- | patches.def.h | 648 |
1 files changed, 648 insertions, 0 deletions
diff --git a/patches.def.h b/patches.def.h new file mode 100644 index 0000000..292763c --- /dev/null +++ b/patches.def.h @@ -0,0 +1,648 @@ +/* + * This file contains patch control flags. + * + * In principle you should be able to mix and match any patches + * you may want. In cases where patches are logically incompatible + * one patch may take precedence over the other as noted in the + * relevant descriptions. + * + * Although layouts typically come as patches they are differentiated + * here for grouping purposes. + */ + +/* Patches */ + +/* This patch changes the rectangle indicating if a tag is used by a client into a bar + * above the tag name for better visibility. + * https://dwm.suckless.org/patches/activetagindicatorbar/ + */ +#define ACTIVETAGINDICATORBAR_PATCH 0 + +/* The alpha patch adds transparency for the status bar. + * https://dwm.suckless.org/patches/alpha/ + */ +#define ALPHA_PATCH 0 + +/* This patch introduces alternative tags which can be switched on the fly for the + * sole purpose of providing visual aid. + * https://dwm.suckless.org/patches/alternativetags/ + */ +#define ALTERNATIVE_TAGS_PATCH 0 + +/* This patch prevents the focus to drift from the active fullscreen client when + * using focusstack(). + * https://dwm.suckless.org/patches/alwaysfullscreen/ + */ +#define ALWAYSFULLSCREEN_PATCH 0 + +/* This patch adds new clients above the selected client, instead of always + * becoming the new master. This behaviour is known from Xmonad. + * This patch takes precedence over ATTACHASIDE_PATCH. + * https://dwm.suckless.org/patches/attachabove/ + */ +#define ATTACHABOVE_PATCH 0 + +/* This patch adds new clients on top of the stack. + * This patch takes precedence over ATTACHBELOW_PATCH. + * https://dwm.suckless.org/patches/attachaside/ + */ +#define ATTACHASIDE_PATCH 0 + +/* This patch adds new clients below the selected client. + * This patch takes precedence over ATTACHBOTTOM_PATCH. + * https://dwm.suckless.org/patches/attachbelow/ + */ +#define ATTACHBELOW_PATCH 0 + +/* This patch adds new clients at the bottom of the stack. + * https://dwm.suckless.org/patches/attachbottom/ + */ +#define ATTACHBOTTOM_PATCH 0 + +/* This patch will make dwm run "~/.config/dwm/autostart_blocking.sh" and + * "~/.config/dwm/autostart.sh &" before entering the handler loop. One or + * both of these files can be ommited. Note the path inside .config rather + * than the original ~/.dwm folder. + * https://dwm.suckless.org/patches/autostart/ + */ +#define AUTOSTART_PATCH 0 + +/* By default, windows that are not visible when requesting a resize/move will not + * get resized/moved. With this patch, they will. + * https://dwm.suckless.org/patches/autoresize/ + */ +#define AUTORESIZE_PATCH 0 + +/* Enhanced taskbar that shows the titles of all visible windows in the status bar + * and allows focus / hiding / unhiding of windows by clicking on the status bar. + * Awesomebar takes precedence over fancybar. + * https://dwm.suckless.org/patches/awesomebar/ + */ +#define AWESOMEBAR_PATCH 0 + +/* This patch adds vertical and horizontal space between the statusbar and the edge of the screen. + * https://dwm.suckless.org/patches/barpadding/ + */ +#define BARPADDING_PATCH 0 + +/* This patch adds an iscentered rule to automatically center clients on the current monitor. + * This patch takes precedence over centeredwindowname and fancybar patches. + * https://dwm.suckless.org/patches/center/ + */ +#define CENTER_PATCH 0 + +/* This patch centers the WM_NAME of the currently selected window on the status bar. + * Both fancybar and awesomebar patches take precedence over this patch. + * https://dwm.suckless.org/patches/centeredwindowname/ + */ +#define CENTEREDWINDOWNAME_PATCH 0 + +/* This patch provides the ability to assign different weights to clients in their + * respective stack in tiled layout. + * https://dwm.suckless.org/patches/cfacts/ + */ +#define CFACTS_PATCH 0 + +/* This patch allows color attributes to be set through the command line. + * https://dwm.suckless.org/patches/cmdcustomize/ + */ +#define CMDCUSTOMIZE_PATCH 0 + +/* This patch tweaks the tagging interface so that you can select multiple tags for tag + * or view by pressing all the right keys as a combo. For example to view tags 1 and 3, + * hold MOD and then press and hold 1 and 3 together. + * https://dwm.suckless.org/patches/combo/ + */ +#define COMBO_PATCH 0 + +/* The cyclelayouts patch lets you cycle through all your layouts. + * https://dwm.suckless.org/patches/cyclelayouts/ + */ +#define CYCLELAYOUTS_PATCH 0 + +/* Updates the position of dmenu to match that of the bar. I.e. if topbar is 0 then dmenu + * will appear at the bottom and if 1 then dmenu will appear at the top. + * https://dwm.suckless.org/patches/dmenumatchtop + */ +#define DMENUMATCHTOP_PATCH 0 + +/* This patch lets you resize the split in the tile layout (i.e. modify mfact) by holding + * the modkey and dragging the mouse. + * This patch can be a bit wonky with other layouts, but generally works. + * https://dwm.suckless.org/patches/dragmfact/ + */ +#define DRAGMFACT_PATCH 0 + +/* Simple dwmc client using a fork of fsignal to communicate with dwm. + * To use this either copy the patch/dwmc shell script to somewhere in your path or + * uncomment the following line in Makefile: #cp -f patch/dwmc ${DESTDIR}${PREFIX}/bin + * http://dwm.suckless.org/patches/dwmc/ + */ +#define DWMC_PATCH 0 + +/* This patch allows no tag at all to be selected. The result is that dwm will start with + * no tag selected and when you start a client with no tag rule and no tag selected then + * it will be opened on the first tag. + * https://dwm.suckless.org/patches/emptyview/ + */ +#define EMPTYVIEW_PATCH 0 + +/* Adds EWMH support for _NET_NUMBER_OF_DESKTOPS, _NET_CURRENT_DESKTOP, _NET_DESKTOP_NAMES + * and _NET_DESKTOP_VIEWPORT, which allows for compatibility with other bars and programs + * that request workspace information. For example polybar's xworkspaces module. + * https://dwm.suckless.org/patches/ewmhtags/ + */ +#define EWMHTAGS_PATCH 0 + +/* This patch allows the user to change size and placement of floating windows using only the + * keyboard. It also allows for temporary vertical and horizontal extension of windows similar + * to other WMs fill command. + * https://dwm.suckless.org/patches/exresize/ + */ +#define EXRESIZE_PATCH 0 + +/* This patch will enable an extra status bar in dwm in a similar manner to the dualstatus + * patch. If the primary status is at the top via topbar then the extra status bar will be + * placed at the bottom and vice versa. + * https://dwm.suckless.org/patches/extrabar/ + */ +#define EXTRABAR_PATCH 0 + +/* Only allow clients to "fullscreen" into the space currently given to them. + * As an example, this will allow you to view a fullscreen video in your browser on + * one half of the screen, while having the other half available for other tasks. + * https://dwm.suckless.org/patches/fakefullscreen/ + */ +#define FAKEFULLSCREEN_PATCH 0 + +/* Similarly to the fakefullscreen patch this patch only allows clients to "fullscreen" into + * the space currently given to them. + * The "twist" with this patch is that fake fullscreen can be toggled on a per client basis + * rather than applying to all clients globally. + */ +#define FAKEFULLSCREEN_CLIENT_PATCH 0 + +/* This patch shows the titles of all visible windows in the status bar + * (as opposed to showing only the selected one). + * Awesomebar takes precedence over fancybar. Fancybar takes precedence over + * the centeredwindowname patch. + * https://dwm.suckless.org/patches/fancybar/ + */ +#define FANCYBAR_PATCH 0 + +/* This patch provides the ability to focus the tag on the immediate left or right of the + * currently focused tag. It also allows to send the focused window either on the left or + * the right tag. + * http://dwm.suckless.org/patches/focusadjacenttag/ + */ +#define FOCUSADJACENTTAG_PATCH 0 + +/* Switch focus only by mouse click and not sloppy (focus follows mouse pointer). + * https://dwm.suckless.org/patches/focusonclick/ + */ +#define FOCUSONCLICK_PATCH 0 + +/* Selects the next window having the urgent flag regardless of the tag it is on. + * The urgent flag can be artificially set with the following xdotool command on any window: + * xdotool selectwindow -- set_window --urgency 1 + * https://dwm.suckless.org/patches/focusurgent/ + */ +#define FOCUSURGENT_PATCH 0 + +/* This patch allows a different border color to be chosen for floating windows. + * https://dwm.suckless.org/patches/float_border_color/ + */ +#define FLOAT_BORDER_COLOR_PATCH 0 + +/* By default, dwm responds to _NET_ACTIVE_WINDOW client messages by setting + * the urgency bit on the named window. This patch activates the window instead. + * https://dwm.suckless.org/patches/focusonnetactive/ + */ +#define FOCUSONNETACTIVE_PATCH 0 + +/* Applies the monocle layout with the focused client on top and hides the bar. When pressed + * again it shows the bar and restores the layout that was active before going fullscreen. + * NB: This patch assumes that the third layout is monocle and that the bar is shown. + * https://dwm.suckless.org/patches/fullscreen/ + */ +#define FULLSCREEN_PATCH 0 + +/* This patch prevents dwm from drawing tags with no clients (i.e. vacant) on the bar. + * https://dwm.suckless.org/patches/hide_vacant_tags/ + */ +#define HIDEVACANTTAGS_PATCH 0 + +/* With this patch dwm's built-in status bar is only shown when HOLDKEY is pressed + * and the bar will now overlay the display. + * http://dwm.suckless.org/patches/holdbar/ + */ +#define HOLDBAR_PATCH 0 + +/* This patch provides a keybinding to rotate all clients in the currently selected + * area (master or stack) without affecting the other area. + * https://dwm.suckless.org/patches/inplacerotate/ + */ +#define INPLACEROTATE_PATCH 0 + +/* Adds rule option for clients to avoid accidental termination by killclient for sticky windows. + * https://dwm.suckless.org/patches/ispermanent/ + */ +#define ISPERMANENT_PATCH 0 + +/* Sometimes dwm crashes when it cannot render some glyphs in window titles (usually emoji). + * This patch is essentially a hack to ignore any errors when drawing text on the status bar. + * https://groups.google.com/forum/m/#!topic/wmii/7bncCahYIww + * https://docs.google.com/viewer?a=v&pid=forums&srcid=MDAwODA2MTg0MDQyMjE0OTgzMzMBMDQ3ODQzODkyMTU3NTAyMTMxNTYBX2RUMVNtOUtDQUFKATAuMQEBdjI&authuser=0 + */ +#define IGNORE_XFT_ERRORS_WHEN_DRAWING_TEXT_PATCH 0 + +/* This patch adds a keybinding to kills all visible clients that are not selected. + * https://dwm.suckless.org/patches/killunsel/ + */ +#define KILLUNSEL_PATCH 0 + +/* Moves the layout symbol in the status bar to the left hand side. + * http://dwm.suckless.org/patches/leftlayout/ + */ +#define LEFTLAYOUT_PATCH 0 + +/* By default in dwm it is possible to make an application fullscreen, then use + * the focusstack keybindings to focus on other windows beneath the current window. + * It is also possible to spawn new windows (e.g. a terminal) that end up getting + * focus while the previous window remains in fullscreen. This patch ensures that + * in such scenarios the previous window loses fullscreen. + * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-losefullscreen-6.2.diff + */ +#define LOSEFULLSCREEN_PATCH 0 + +/* This patch adds helper functions for maximizing, horizontally and vertically, floating + * windows using keybindings. + * https://dwm.suckless.org/patches/maximize/ + */ +#define MAXIMIZE_PATCH 0 + +/* Control Music Player Daemon via keybinds. + * This patch depends on an additional library lmdpclient so if you want to enable this + * then you will also have to append -lmpdclient to the LIBS configuration in config.mk. + * A placeholder has been added there for reference. + * https://dwm.suckless.org/patches/mpdcontrol/ + */ +#define MDPCONTROL_PATCH 0 + +/* Adds rules per monitor, e.g. have default layouts per monitor. + * The use case for this is if the second monitor is vertical (i.e. rotated) then + * you may want to use a different default layout for this monitor than what is + * used for the main monitor. E.g. normal vertical split for main monitor and + * horizontal split for the second. + */ +#define MONITOR_RULES_PATCH 0 + +/* Always display the the monocle-symbol as defined in config.h if the monocle-layout + * is activated. Do not display the number of open clients in the current tag. + * https://dwm.suckless.org/patches/monoclesymbol/ + */ +#define MONOCLESYMBOL_PATCH 0 + +/* This patch allows you to move clients around in the stack and swap them with the master. + * https://dwm.suckless.org/patches/movestack/ + */ +#define MOVESTACK_PATCH 0 + +/* Removes the border when there is only one window visible. + * https://dwm.suckless.org/patches/noborder/ + */ +#define NOBORDER_PATCH 0 + +/* Enable modifying or removing dmenu in config.def.h which resulted previously in a + * compilation error because two lines of code hardcode dmenu into dwm. + * https://dwm.suckless.org/patches/nodmenu/ + */ +#define NODMENU_PATCH 0 + +/* This patch makes it so dwm will only exit via quit() if no windows are open. + * This is to prevent you accidentally losing all your work. + * https://dwm.suckless.org/patches/onlyquitonempty/ + */ +#define ONLYQUITONEMPTY_PATCH 0 + +/* The pertag patch adds nmaster, mfacts and layouts per tag rather than per + * monitor (default). + * https://dwm.suckless.org/patches/pertag/ + */ +#define PERTAG_PATCH 0 + +/* This controls whether or not to also store bar position on a per + * tag basis, or leave it as one bar per monitor. + */ +#define PERTAGBAR_PATCH 0 + +/* This patch provides a way to move clients up and down inside the client list. + * https://dwm.suckless.org/patches/push/ + */ +#define PUSH_PATCH 0 + +/* This patch provides a way to move clients up and down inside the client list, + * but does not push up or down into the master area (except that it does not take + * nmaster into account). + * This takes precedence over the push patch above. + * https://dwm.suckless.org/patches/push/ + */ +#define PUSH_NO_MASTER_PATCH 0 + +/* By default, windows only resize from the bottom right corner. With this + * patch the mouse is warped to the nearest corner and you resize from there. + * https://dwm.suckless.org/patches/resizecorners/ + */ +#define RESIZECORNERS_PATCH 0 + +/* Adds a keyboard shortcut to restart dwm or alternatively by using kill -HUP dwmpid. + * Additionally dwm can quit cleanly by using kill -TERM dwmpid. + * https://dwm.suckless.org/patches/restartsig/ + */ +#define RESTARTSIG_PATCH 0 + +/* This patch let's you rotate through the stack using keyboard shortcuts. + * https://dwm.suckless.org/patches/rotatestack/ + */ +#define ROTATESTACK_PATCH 0 + +/* This patch saves size and position of every floating window before it is forced + * into tiled mode. If the window is made floating again then the old dimensions + * will be restored. + * https://dwm.suckless.org/patches/save_floats/ + */ +#define SAVEFLOATS_PATCH 0 + +/* The scratchpad patch allows you to spawn or restore a floating terminal window. + * It is typically useful when one need to do some short typing. + * https://dwm.suckless.org/patches/scratchpad/ + */ +#define SCRATCHPAD_PATCH 0 + +/* Allows restarting dwm without the dependency of an external script. + * https://dwm.suckless.org/patches/selfrestart/ + */ +#define SELFRESTART_PATCH 0 + +/* This patch allows border pixels to be changed during runtime. + * https://dwm.suckless.org/patches/setborderpx/ + */ +#define SETBORDERPX_PATCH 0 + +/* In a multi-head setup monitor 0 is by default the primary screen, with the left and right + * screen being monitor 1 and 2 respectively. This patch sorts screens left to right (or + * top to bottom in a vertical layout) which aims to address some inconsistencies when it + * comes to focusmon, tagmon and similar functionality. + * https://www.mail-archive.com/[email protected]/msg09400.html + */ +#define SORTSCREENS_PATCH 0 + +/* Spawns programs from currently focused client's working directory. + * https://dwm.suckless.org/patches/spawn_cwd/ + */ +#define SPAWNCMD_PATCH 0 + +/* This patch draws and updates the statusbar on all monitors. + * https://dwm.suckless.org/patches/statusallmons/ + */ +#define STATUSALLMONS_PATCH 0 + +/* This patch enables colored text in the status bar. It changes the way colors are defined + * in config.h allowing multiple color combinations for use in the status script. + * https://dwm.suckless.org/patches/statuscolors/ + */ +#define STATUSCOLORS_PATCH 0 + +/* This patch adds configuration options for horizontal and vertical padding in the status bar. + * https://dwm.suckless.org/patches/statuspadding/ + */ +#define STATUSPADDING_PATCH 0 + +/* Adds toggleable keyboard shortcut to make a client 'sticky', i.e. visible on all tags. + * https://dwm.suckless.org/patches/sticky/ + */ +#define STICKY_PATCH 0 + +/* The systray patch adds systray for the status bar. + * https://dwm.suckless.org/patches/systray/ + */ +#define SYSTRAY_PATCH 0 + +/* This patch adds "window swallowing" to dwm as known from Plan 9's windowing system rio. + * Clients marked with isterminal in config.h swallow a window opened by any child process, + * e.g. running xclock in a terminal. Closing the xclock window restores the terminal window + * in the current position. + * https://dwm.suckless.org/patches/swallow/ + */ +#define SWALLOW_PATCH 0 + +/* Switch focus between the master and stack columns using a single keybinding. + * https://dwm.suckless.org/patches/switchcol/ + */ +#define SWITCHCOL_PATCH 0 + +/* By default dwm allow you to set application specific rules so that you can have your browser, + * for example, start up on tag 9 optionally on a given monitor when you open your browser it is + * then automatically moved to the configured tag, but you have to manually enable the tag to see + * the newly opened application. + * This patch adds an extra configuration option for individual rules where: + * 0 is default behaviour + * 1 automatically moves you to the tag of the newly opened application and + * 2 enables the tag of the newly opened application in addition to your existing enabled tags + * + * Closing that window reverts the view back to what it was before the window was opened. + * + * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-switchtag-6.2.diff + * Also see https://dwm.suckless.org/patches/switchtotag + */ +#define SWITCHTAG_PATCH 0 + +/* Adds keyboard shortcuts to move all (or only floating) windows from one tag to another. + * https://dwm.suckless.org/patches/tagall/ + */ +#define TAGALL_PATCH 0 + +/* This patch allows you to move all visible windows on a monitor to an adjacent monitor. + * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-tagallmon-6.2.diff + */ +#define TAGALLMON_PATCH 0 + +/* This patch adds an option to place tags in rows like in many other window managers. + * https://dwm.suckless.org/patches/taggrid/ + */ +#define TAGGRID_PATCH 0 + +/* This patch makes new clients attach into the stack area when you toggle a new tag into + * view. This means your master area will remain unchanged when toggling views. + * The allmaster patch will cause all clients in the master area to be left alone. This patch + * takes precedence over the onemaster tagintostack patch. + * https://dwm.suckless.org/patches/tagintostack/ + */ +#define TAGINTOSTACK_ALLMASTER_PATCH 0 + +/* This patch makes new clients attach into the stack area when you toggle a new tag into + * view. This means your master area will remain unchanged when toggling views. + * The onemaster patch will cause the first client in the master area to be left alone. + * https://dwm.suckless.org/patches/tagintostack/ + */ +#define TAGINTOSTACK_ONEMASTER_PATCH 0 + +/* If you try to send a fullscreen window to an adjacent monitor using tagmon then + * the window is moved behind the scenes, but it remains in fullscreen on the original + * monitor until you exit fullscreen view (at which point it will appear on the adjacent + * monitor). This patch allows a fullscreen window to be moved to an adjacent monitor + * while remaining in fullscreen. + * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-tagmonfixfs-6.2.diff + */ +#define TAGMONFIXFS_PATCH 0 + +/* This patch allows you to swap all visible windows on one monitor with those of an + * adjacent monitor. + * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-tagswapmon-6.2.diff + */ +#define TAGSWAPMON_PATCH 0 + +/* Adds a new color scheme used by the (selected) window title in the bar. + * https://dwm.suckless.org/patches/titlecolor/ + */ +#define TITLECOLOR_PATCH 0 + +/* This patch allows you to toggle fullscreen on and off using a single shortcut key. + * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-togglefullscreen-6.2.diff + */ +#define TOGGLEFULLSCREEN_PATCH 0 + +/* This patch resets isfloating on any visible windows that have it set. + * Optionally also applies a layout. + * https://dwm.suckless.org/patches/unfloatvisible/ + */ +#define UNFLOATVISIBLE_PATCH 0 + +/* This patch makes "urgent" windows have different colors. + * https://dwm.suckless.org/patches/urgentborder/ + */ +#define URGENTBORDER_PATCH 0 + +/* This patch adds configurable gaps between windows differentiating between outer, inner, + * horizontal and vertical gaps. + * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-vanitygaps-6.2.diff + * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-vanitygaps-cfacts-6.2.diff + */ +#define VANITYGAPS_PATCH 0 + +/* Follow a window to the tag it is being moved to. + * https://dwm.suckless.org/patches/viewontag/ + */ +#define VIEWONTAG_PATCH 0 + +/* This patch warps the mouse cursor to the center of the currently focused window or screen + * when the mouse cursor is (a) on a different screen or (b) on top of a different window. + * https://dwm.suckless.org/patches/warp/ + */ +#define WARP_PATCH 0 + +/* Sometimes a single application opens different windows depending on the task + * at hand and this is often reflected in the WM_WINDOW_ROLE(STRING) x property. + * This patch adds the role field to the rule configuration so that one can + * differentiate between, say, Firefox "browser" vs "Preferences" vs "Manager" + * or Google-chrome "browser" vs "pop-up". + * https://github.com/bakkeby/dwm-vanitygaps/blob/master/patches/dwm-windowrolerule-6.2.diff + */ +#define WINDOWROLERULE_PATCH 0 + +/* The winview patch allows switching the view to that of a given client from the all-window + * view (Mod-0) using a keyboard shortcut. + * http://dwm.suckless.org/patches/winview/ + */ +#define WINVIEW_PATCH 0 + +/* Allows dwm to read colors from xrdb (.Xresources) during runtime. Compatible with + * the float border color, awesomebar, urgentborder and titlecolor patches. + * https://dwm.suckless.org/patches/xrdb/ + */ +#define XRDB_PATCH 0 + +/* The zoomswap patch allows a master and a stack window to swap places + * rather than every window on the screen changing position. + * https://dwm.suckless.org/patches/zoomswap/ + */ +#define ZOOMSWAP_PATCH 0 + +/* Layouts */ + +/* Bottomstack layout. + * https://dwm.suckless.org/patches/bottomstack/ + */ +#define BSTACK_LAYOUT 0 + +/* Bottomstack horizontal layout. + * https://dwm.suckless.org/patches/bottomstack/ + */ +#define BSTACKHORIZ_LAYOUT 0 + +/* Centered master layout. + * https://dwm.suckless.org/patches/centeredmaster/ + */ +#define CENTEREDMASTER_LAYOUT 0 + +/* Centered floating master layout. + * https://dwm.suckless.org/patches/centeredmaster/ + */ +#define CENTEREDFLOATINGMASTER_LAYOUT 0 + +/* Same as the default tile layout except clients in the master area are arranged in + * columns (i.e. left to right). + * https://dwm.suckless.org/patches/columns/ + */ +#define COLUMNS_LAYOUT 0 + +/* Deck layout. + * https://dwm.suckless.org/patches/deck/ + */ +#define DECK_LAYOUT 0 + +/* Fibonacci dwindle layout. + * https://dwm.suckless.org/patches/fibonacci/ + */ +#define FIBONACCI_DWINDLE_LAYOUT 0 + +/* Fibonacci spiral layout. + * https://dwm.suckless.org/patches/fibonacci/ + */ +#define FIBONACCI_SPIRAL_LAYOUT 0 + +/* Flextile deluxe layout. + * A revamped, more flexible, and over-the-top version of the original flextile layout. + * https://dwm.suckless.org/patches/flextile/ (original) + */ +#define FLEXTILE_DELUXE_LAYOUT 0 + +/* Gappless grid layout. + * https://dwm.suckless.org/patches/gaplessgrid/ + */ +#define GAPPLESSGRID_LAYOUT 0 + +/* Gridmode (grid) layout. + * https://dwm.suckless.org/patches/gridmode/ + */ +#define GRIDMODE_LAYOUT 0 + +/* Horizontal grid (horizgrid) layout. + * https://dwm.suckless.org/patches/horizgrid/ + */ +#define HORIZGRID_LAYOUT 0 + +/* Grid layout where nmaster controls the number of rows. + * https://dwm.suckless.org/patches/nrowgrid/ + */ +#define NROWGRID_LAYOUT 0 + +/* The default tile layout. + * This can be optionally disabled in favour of other layouts. + */ +#define TILE_LAYOUT 1 + +/* Monocle layout (default). + * This can be optionally disabled in favour of other layouts. + */ +#define MONOCLE_LAYOUT 1 |